Subscriber access provided by KUNGL TEKNISKA HOGSKOLAN

Communication

Regio- and Stereoselective Cyanotriflation of Alkynes Using Aryl(cyano)iodonium Triflates Xi Wang, and Armido Studer J. Am. Chem. Soc., Just Accepted Manuscript • DOI: 10.1021/jacs.6b00869 • Publication Date (Web): 18 Feb 2016 Downloaded from http://pubs.acs.org on February 19, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of the American Chemical Society is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

Regio- and Stereoselective Cyanotriflation of Alkynes Using Aryl(cyano)iodonium Triflates Xi Wang and Armido Studer* Institute of Organic Chemistry, University of Münster, Corrensstrasse 40, 48149 Münster, Germany Supporting Information Placeholder ABSTRACT: A novel, mild, and versatile approach for regioselective syn-addition of both the CN group and the OTf group of aryl(cyano)iodonium triflates to alkynes is described. The reaction uses Fe-catalysis and can be conducted in gram-scale. Products of the vicinal cyanotriflation can be stereospecifically readily further functionalized, rendering the method highly valuable. The acrylonitrile structural motif is highly versatile in organic synthesis. Acrylonitriles occur as building blocks in natural product synthesis, in pharmaceutical industry, and in materials science. Therefore, the development of practical meth1 ods for their synthesis is of importance. A direct approach towards acrylonitriles is the transition metal catalyzed alkyne 2 hydrocyanation. Even more valuable are stereoselective alkyne cyanations with concomitant C-C and C-X-bond formation. Along these lines, Pd-, Ni-, and Lewis acid catalyzed 3 4 carbocyanations and heterocyanations of alkynes have been reported. The latter reactions use X-CN-type reagents where 4 X is Me3Si, R2B, Bu3Sn, Me3Ge, RS, ArO, or Br. The Br, R2B and Bu3Sn-products are particularly interesting since they can be further chemically transformed by cross coupling reactions. Vinyl triflates have been recognized as reliable precursors for vinyl-organometallic intermediates in cross coupling reac5 tions. They are generally prepared by trapping of in situ 6 generated enolates with triflating reagents. Alternatively, Lepore described the Zn(OTf)2 catalyzed alkyne triflation to vinyl triflates with trimethylsilyl trifluoromethanesulfonate 7a and little water. Cu-catalyzed cis aryl- and vinyl-triflation of alkynes has been successfully established by the Gaunt 7b group. Akita and Koike recently disclosed the preparation of trifluoromethylated vinyl triflates via trans addition of both the CF3 and the OTf group to alkynes via photoredox 7c catalysis. Aryl(cyano)iodonium triflates of type 1, first introduced by Zhdankin and Stang, were shown to react with silyl enol ethers to afford α-trifluoromethylsulfonyl ketones (Scheme 8a 1). ArI(CN)OTf (1) has been also applied as an iodonium transfer reagent in the reaction with aryl or alkynyl tributyltin compounds to give the corresponding iodonium 8b salts. Reagents of type 1 also act as efficient electrophilic cyanation reagents. Along these lines, Wang and coworkers 9 developed the direct electrophilic cyanation of various aro8c matic compounds and the preparation of thiocyanates through electrophilic cyanation of thioethers was published

8d

by the Shi group. Hence, existing reports on the use of reagents 1 reveal that they react either as electrophilic iodonium, triflate or cyano transfer reagents. However, reactions with 1 where both the cyano and the triflate moiety are transferred are currently unknown. Since both functionalities are valuable, such transformations would be highly useful. Herein, we disclose a practical method for highly stereo- and regioselective syn alkyne cyanotriflation with an aryl(cyano)iodonium triflate under Fe-catalysis.

Scheme 1. Iodonium, triflate, and cyano transfers with aryl(cyano)iodonium triflates

Based on previous reports on single electron transfer (SET) 10 reduction of I(III)-reagents, we assumed that an aryl(cyano)iodonium triflate 1 can react via SET reduction to the corresponding aryl(cyano)iodanyl radical and the triflate 8c anion. α-Fragmentation of the cyano radical in such an iodanyl radical is not likely due to the high energy of the CNradical. For the same reason, aryl radical fragmentation 11 should be a high energy pathway. Therefore, the iodanyl radical might be long enough lived to undergo radical addition to an alkyne which might eventually lead to cyanotriflation products of type 2. To proof our hypothesis we tested the cyanotriflation of alkyne 3c with various I(III)-reagents 1a-c under different conditions (Table 1, Figure 1). Careful optimization revealed that cyanotriflation works and that reaction of model como pound 3c is best conducted at 45 C with 3,5di(trifluoromethyl)-phenyl(cyano)iodonium triflate (1a) (2.2 equiv) as the triflate and cyanide source, Fe(OAc)2 in combi12 nation with phenanthroline (L1) as the catalyst, and 1,2-

ACS Paragon Plus Environment

Journal of the American Chemical Society

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

dichloroethane as the solvent (Table 1, entry 1). Product 2c was isolated in 81% yield with excellent cis-selectivity and complete regioselectivity. Without Fe(OAc)2 and 1,10phenanthroline only a trace amount of 2c was formed (entry 2). Yield dropped to 36% without phenanthroline indicating the importance of the ligand (entry 3). Therefore, other ligands L2-L5 were tested. However, in all cases a significant loss in yield was noted (entries 4-7).

Page 2 of 5

2c were formed by replacing Fe(OAc)2 with CuCl (entry 16). Cyanotriflation with BF3·Et2O or HOTf failed and AlCl3 showed a very low yield (entries 17-19). 3c was smoothly converted into 2c in the presence of tetrabutylammonium iodide (TBAI), albeit in a moderate yield (entry 20).

Table 2. Substrate scope of the regio- and stereoselective cyanotriflation reactiona,b

Table 1. Reaction optimization

entry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

a

promoter Fe(OAc)2 none Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OAc)2 Fe(OTf)2 FeCl2 FeCl3 CuCl BF3·Et2O HOTf AlCl3 TBAI

ligand L1 none none L2 L3 L4 L5 L1 L1 L1 L1 L1 L1 L1 L1 none none none none none

1 1a 1a 1a 1a 1a 1a 1a 1b 1c 1a 1a 1a 1a 1a 1a 1a 1a 1a 1a 1a

solvent DCE DCE DCE DCE DCE DCE DCE DCE DCE DCM MeCN DCE DCE DCE DCE DCE DCE DCE DCE DCE

b

yield (%) c 78, 81 (72:1) trace (NA) 36 (26:1) 51 (61:1) 20 (24:1) 24 (18:1) 31 (23:1) 22 (22:1) 40 (54:1) 63 (42:1) trace (NA) d 64 (91:1) 23 (4:1) 49 (15:1) 55 (21:1) trace (NA) trace (NA) trace (NA) 12 (2:1) 32 (9:1)

a

Reaction condition: 3c (0.20 mmol, 1.0 equiv), reagent 1 (0.44 mmol, 2.2 equiv), promoter (0.02 mmol, 10 mol%), o ligand (0.02 mmol, 10 mol%), solvent (1 mL), 45 C, 15 h. b 19 Yield determined by F NMR analysis using PhCF3 as an internal standard; isomer ratio in parentheses determined by GC-MS analysis on the crude product; NA, not applicable; c d Isolated yield; Conducted at room temperature.

a

Figure 1. Reagents and ligands tested

Reaction condition: 3 (0.20 mmol, 1.0 equiv), 1a (0.44 mmol, 2.2 equiv), Fe(OAc)2 (0.02 mmol, 10 mol%), ligand L1 o b (0.02 mmol, 10 mol%), solvent (1 mL), 45 C, 15 h. Isolated c yield. After 15 h, renewed Fe(OAc)2 (0.02 mmol, 10 mol%), ligand L1 (0.02 mmol, 10 mol%), and 1a (0.44 mmol, 2.2 equiv) addition and continued stirring for another 15 h.

The electronic nature of the R substituent of the iodine reagent played an important role: 1b and 1c provided worse results (entries 8-9). A lower yield was achieved in DCM (entry 10) and reaction did not work in acetonitrile (entry 11). A slightly lower yield (64%) but highest selectivity was obtained at room temperature (entry 12). Fe(OTf)2, FeCl2, and FeCl3 provided worse results (entries 13-15) and only traces of

Having identified optimized conditions, we next tested the scope and limitations of the novel transformation (Table 2). 1-Aryl-1-pentynes bearing either electron-withdrawing or donating substituents at the para position of the aryl group were smoothly converted in moderate to high yield with 13 excellent regio- and stereoselectivity to the acrylonitriles 2a-i. Gram scale synthesis of 2e was achieved in 88% yield demonstrating the practicability of the transformation. The trifluoromethyloxy (2j) and the trifluoromethylthiyl substituent (2k), which are popular in pharmaceuticals and in agrochemicals, are compatible with the cyanotriflation. Lower yields were obtained by cyanotriflation of alkynes bearing meta- and ortho-substituents (2l-n). We were delighted to find that the 1,3-diyne 3o could be selectively cyanotriflated (2o). A significantly lower yield was obtained for the transformation of a 1,3-enyne (2p). Primary alkylchlorides, alkylto-

ACS Paragon Plus Environment

Page 3 of 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

sylates and alkylphthalimides were tolerated (2q-s). Not surprisingly, reaction worked well on a methyl substituted alkyne (2t). Remarkably, also with bulky i-Pr (2u) and t-Bu (2v) substituted arylalkynes, moderate to good yields were achieved. Aryl alkynes bearing a cyclopropyl, a cyclopentyl, and a cyclohexyl group could also be converted to the targeted tetrasubstituted alkenes 2w-y. Whereas for 2x and 2y good yields were obtained, the cylopropyl alkyne reacted in moderate yield to 2w. Unfortunately, bisarylalkynes and bisalkylalkynes did not react under optimized conditions to the corresponding cyanotriflated products and phenylacetylene provided the cyanotriflation product in very low yield (

Regio- and Stereoselective Cyanotriflation of Alkynes Using Aryl(cyano)iodonium Triflates.

A novel, mild, and versatile approach for regioselective syn-addition of both the CN and OTf groups of aryl(cyano)iodonium triflates to alkynes is des...
325KB Sizes 0 Downloads 7 Views