J Adv Prosthodont 2015;7:506
http://jap.or.kr
http://dx.doi.org/10.4047/jap.2015.7.6.506
Erratum - The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin Naichuan Su1,2, Li Yue3, Yunmao Liao1, Wenjia Liu1,2, Hai Zhang4, Xin Li5, Hang Wang1,2*, Jiefei Shen1,2* State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, P. R. China Department of Prosthodontics, West China School of Stomatology, Sichuan University, Chengdu, P. R. China 3 Department of Dental Technology, West China Hospital of Stomatology, Sichuan University, Chengdu, P. R. China 4 Department of Restorative Dentistry, School of Dentistry, University of Washington, Seattle, USA 5 Department of Stomatology, Mianyang Central Hospital, Mianyang, P. R. China 1 2
[J Adv Prosthodont 2015;7:214-23] DOI of original article: 10.4047/jap.2015.7.3.214
Shear bond strength of bilayered structures (MPa)
The article ‘The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin’ authored by Naichuan Su, Li Yue, Yunmao Liao, Wenjia Liu, Hai Zhang, Xin Li, Hang Wang, Jiefei Shen, published in June issue [Vol 7, No 3] of The Journal of Advanced Prosthodontics (2015), has an erratum. On page 219, there was an error in the Fig. 5. The revised Fig. 5 is as in the following. The Journal of Advanced Prosthodontics apologizes to the readers for this error.
Powder size 50 um 110 um
18.00 16.00
Sandblasting time 7s
Sandblasting pressure 0.1 MPa
14 s
0.2 MPa
21 s
0.4 MPa 0.6 MPa
14.00 12.00 10.00 8.00 6.00 4.00 1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
0
Group
Fig. 5. Shear bond strength of bilayered structures of Y-TZP zirconia core with veneer indirect composite resin after polishing (Group 0) or after different types of sandblasting. (* means there is a statistical significance between groups, while the other two factors are constant; + means there is no statistical significance between groups, while the other two factors are constant).
506
pISSN 2005-7806, eISSN 2005-7814
http://jap.or.kr
http://dx.doi.org/10.4047/jap.2015.7.6.506
Erratum - The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin Naichuan Su1,2, Li Yue3, Yunmao Liao1, Wenjia Liu1,2, Hai Zhang4, Xin Li5, Hang Wang1,2*, Jiefei Shen1,2* State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, P. R. China Department of Prosthodontics, West China School of Stomatology, Sichuan University, Chengdu, P. R. China 3 Department of Dental Technology, West China Hospital of Stomatology, Sichuan University, Chengdu, P. R. China 4 Department of Restorative Dentistry, School of Dentistry, University of Washington, Seattle, USA 5 Department of Stomatology, Mianyang Central Hospital, Mianyang, P. R. China 1 2
[J Adv Prosthodont 2015;7:214-23] DOI of original article: 10.4047/jap.2015.7.3.214
Shear bond strength of bilayered structures (MPa)
The article ‘The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin’ authored by Naichuan Su, Li Yue, Yunmao Liao, Wenjia Liu, Hai Zhang, Xin Li, Hang Wang, Jiefei Shen, published in June issue [Vol 7, No 3] of The Journal of Advanced Prosthodontics (2015), has an erratum. On page 219, there was an error in the Fig. 5. The revised Fig. 5 is as in the following. The Journal of Advanced Prosthodontics apologizes to the readers for this error.
Powder size 50 um 110 um
18.00 16.00
Sandblasting time 7s
Sandblasting pressure 0.1 MPa
14 s
0.2 MPa
21 s
0.4 MPa 0.6 MPa
14.00 12.00 10.00 8.00 6.00 4.00 1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
0
Group
Fig. 5. Shear bond strength of bilayered structures of Y-TZP zirconia core with veneer indirect composite resin after polishing (Group 0) or after different types of sandblasting. (* means there is a statistical significance between groups, while the other two factors are constant; + means there is no statistical significance between groups, while the other two factors are constant).
506
pISSN 2005-7806, eISSN 2005-7814
