Communication pubs.acs.org/JACS

Catalytic Asymmetric Direct-Type 1,4-Addition Reactions of Simple Amides Hirotsugu Suzuki, Io Sato, Yasuhiro Yamashita, and Shu̅ Kobayashi* Department of Chemistry, School of Science, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-0033, Japan S Supporting Information *

27).8 Hence, currently the most reliable method for C−C bond formation with amides or esters is still the use of stoichiometric amounts of metal enolates with strong bases9 such as lithium diisopropylamide (LDA) or potassium hexamethyldisilazide (KHMDS) or the use of isolable silicon enolates with stoichiometric amounts of silicon reagents and bases (Mukaiyama-type reactions).10 As an approach to the catalytic variants, some modified amides or esters have been developed;11 however, the use of additional functional groups for activation of the α-hydrogen often requires tedious procedures for their attachment and release, and this can limit the substrate scope and applications of the reaction. In 2011, our group reported a catalytic direct Mannich-type reaction of an amide using a catalytic amount of a silicon Lewis acid and a base; however, its stereoselectivity, especially enantioselectivity, remained unsatisfactory.7a To our knowledge, there have been no other examples of catalytic reactions with simple amides or esters (Scheme 1). We recently reported on the catalytic direct Mannich-type reactions of simple esters with no activating group at the αposition using a catalytic amount of potassium hydride (KH) through the product base mechanism.7b In this reaction, an intermediate (a potassium amide species) possesses strong Brønsted basicity for deprotonation of simple esters directly without regeneration of KH. Thus, the catalytic turnover in this reaction depends on the reaction intermediates. We envisioned that it might be possible to expand this concept to other types of reactions. Here we report the first example of catalytic enantioselective 1,4-addition reactions of simple amides without any activating group at the α-position. 1,4-Addition reactions of carbonyl compounds with α,βunsaturated carbonyl compounds provide an important method for constructing 1,5-dicarbonyl compounds directly. Although several successful examples have been reported,5 there has been no example of the reaction using amides without any activating group on their structure as nucleophilic partners.12 On the basis of a consideration of the product base mechanism, the basicity of the reaction intermediate is important for catalytic turnover. In 1,4-addition reactions of α,β-unsaturated carbonyl compounds, the Brønsted basicity of the reaction intermediate, a metal enolates, can be determined by the structure of the carbonyl moiety. Model 1,4-addition reactions were conducted using N,N-dimethylpropionamide (2a) and cinnamate derivatives in the presence of a catalytic amount of KH. Whereas chalcone (1a), methyl cinnamate (1b), and S-tert-butyl

ABSTRACT: The development of catalytic asymmetric direct-type reactions of less acidic carbonyl compounds such as amides and esters has been a challenging theme in organic chemistry for decades. Here we describe the asymmetric direct 1,4-addition reactions of simple amides with α,β-unsaturated carbonyl compounds using a catalytic amount of a novel chiral catalyst consisting of a potassium base and a macrocyclic chiral crown ether. The desired 1,5dicarbonyl compounds were obtained in high yields with excellent diastereo- and enantioselectivities. This is the first example of a highly enantioselective catalytic direct-type reaction of simple amides. In addition, the structure of the chiral potassium catalyst has been investigated by X-ray crystallographic, dynamic 1H NMR, and MALDI-TOF MS analyses. arbon−carbon bond formation at the α-position of carbonyl compounds is one of the most fundamental and frequently employed methodologies for the construction of complex molecules in organic synthesis.1,2 A catalytic variant of this reaction in which a catalytic amount of a mediator (such as an acid or base) works efficiently was recently investigated in detail from the viewpoint of atom economy.3−5 However, applicable carbonyl compounds are limited to aldehydes and ketones in most cases,6 and the development of catalytic reactions that involve amides or esters is still very challenging (Scheme 1).7 The main issue is considered to be the Brønsted acidity of the α-hydrogen of a carbonyl compound for deprotonation; the hydrogens of amides (pKa in DMSO ≈ 35) or esters (pKa in DMSO ≈ 31) are normally much less acidic than those of aldehydes or ketones (pKa in DMSO ≈

C

Scheme 1. Nucleophilic Reactions of Simple Amides and Esters

Received: February 22, 2015

© XXXX American Chemical Society

A

DOI: 10.1021/jacs.5b01943 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Communication

Journal of the American Chemical Society thiocinnamate (1c) either did not react or reacted sluggishly under the conditions (Table 1, entries 1−3), it was found that

Table 2. Catalytic Asymmetric 1,4-Addition Reactions of Simple Amides in the Presence of Crown Ethersa

Table 1. Catalytic 1,4-Addition Reactions of Simple Amidesa

entry d

1 2d 3d 4d 5 6 7 8 9e,f 10e,f

1b

2c

base

yield (%)

anti/syn

1a 1b 1c 1d 1d 1d 1d 1d 1d 1e

2a 2a 2a 2a 2a 2a 2a 2b 2b 2b

KH KH KH KH LiHMDS NaHMDS KHMDS KHMDS KHMDS KHMDS

0 99:1 >99:1 >99:1 >99:1 −

60b 8b 41b 93 93 98 98 98 −

a Reaction conditions: 1e (0.400 mmol), 2 (0.800 mmol), toluene, −40 °C, 15 h, catalyst prepared from KHMDS and L. bThe absolute configuration of the product is opposite. cThe reaction was conducted using 2b (1.2 equiv) with 4 Å MS at −78 °C for 18 h.

cinnamamide 1d reacted with 2a to afford the desired 1,5dicarbonyl compound 3da in high yield with high diastereoselectivity (entry 4). This result indicated that the reaction intermediate, a metal amide enolate, had a Brønsted basicity that was strong enough to deprotonate substrate 2a and that the reaction proceeded through the product base mechanism. Among the metal amides screened (entries 5−7), KHMDS was found to be the optimum Brønsted base, giving the desired product in high yield with high diastereoselectivity compared with those obtained with other alkaline-metal amides (entry 7). Substituents on the nitrogen atom of propionamide influenced the diastereoselectivity of the reaction, and the use of the sterically bulky N,N-diphenylpropionamide (2b) improved the diastereoselectivity (entry 8). Finally, the 1,4-addition reaction proceeded even with 1.2 equiv of nucleophile (entry 9), and the reaction with N,N-dimethylcinnamamide (1e) also gave a similar result (entry 10). An asymmetric variant of this 1,4-addition reaction was then investigated. Chiral crown ethers were used to modify the potassium cation.13 Whereas the typical binaphtho crown ethers binaphtho-14-crown-4 (L1), binaphtho-17-crown-5 (L2), and binaphtho-20-crown-6 (L3) were not effective (Table 2, entries 1−3), the chiral macro crown ether binaphtho-34-crown-10 (L4) afforded the desired product with high enantioselectivity (entry 4). The use of this type of very large chiral macro crown ether to modify potassium metal in asymmetric catalysis has not been reported previously. It was also found that 2b gave the desired product in higher yield and diastereoselectivity than 2a (entry 5). Increasing the amount of KHMDS relative to the amount of crown ether improved the reactivity without loss of enantioselectivity at −78 °C (entries 6 and 7), and the desired 1,4-addition reaction proceeded even in the presence of 5 mol % KHMDS and 2.8 mol % L4 (entry 8; for the structure, vide infra). KHMDS itself did not show any catalytic activity under the reaction conditions (entry 9). The substrate scope was surveyed under the optimized conditions (Table 3).14 Excellent enantioselectivities of the 1,4-

Table 3. Substrate Scope of Catalytic Asymmetric 1,4Addition Reactions of Simple Amidesa

entry

R1

2

yield (%)

anti/syn

ee (%)

b

o-MeC6H4 (1f) m-MeC6H4 (1g) p-MeC6H4 (1h) p-MeOC6H4 (1i) p-ClC6H4 (1j) p-BrC6H4 (1k) 2-furyl (1l) 1-naphthyl (1m) 2-naphthyl (1n) Me (1o) i Pr (1p) i Bu (1q) Cy (1r) Ph (1e)

2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2ci

91 92 99 95 90 95 93 97 93 quant. 90 89 89 94

>99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1 >99:1

98 97 96 98 96 96 95 98 93 96 98 97 98 94

1 2 3c 4c,d 5 6 7 8 9c,e,f,g 10e,h 12c,e 13c 14c 15c a

Reaction conditions (unless otherwise noted): 1 (0.400 mmol), 2 (0.480 mmol), toluene, 4 Å MS, −78 °C, 18 h, catalyst prepared from KHMDS (0.0200 mmol) and L4 (0.0112 mmol). bThe reaction time was 30 h. cThe reaction was conducted at −60 °C. dKHMDS (8 mol %) and L4 (4.4 mol %) were used. eKHMDS (10 mol %) and L4 (5.5 mol %) were used. fThe concentration was 0.1 M. gThe reaction was conducted without 4 Å MS. h1 (2.0 equiv) and 2 (1.0 equiv) were used. i2c: R2 = C2H5.

addition reactions were maintained by changing the position of the methyl substituent on the aromatic ring of the cinnamamide (entries 1−3). α,β-Unsaturated amides bearing either electronrich or electron-deficient substituents on the aromatic moiety gave the desired products in high yields with high stereoB

DOI: 10.1021/jacs.5b01943 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Communication

Journal of the American Chemical Society selectivities (entries 4−6). Outstanding diastereo- and enantioselectivity were also obtained with the 2-furylsubstituted α,β-unsaturated amide (entry 7). The steric bulk of hindered aromatic rings (1-naphthyl and 2-naphthyl) affected neither the yield nor the stereoselectivity of the reaction (entries 8 and 9). Furthermore, the asymmetric 1,4addition reactions with aliphatic α,β-unsaturated amides also proceeded cleanly without any loss of enantioselectivity (entries 10−14). As a nucleophile, butyramide (2c) was also found to work well under the reaction conditions (entry 15). Notably, excellent yields, perfect anti selectivities, and outstanding diastereo- and enantioselectivities were obtained with all of the substrates tested. To demonstrate the synthetic utility of this reaction, several transformations of the products were conducted (Scheme 2).

Alcohol 4o was also converted into 9, a useful intermediate for (−)-lasiol, by acidic lactone formation (eq 5).19 Since the use of chiral macro crown ethers such as L4 for asymmetric catalysis is rare (to the best of our knowledge, this is the first case), we were interested in the structure of the catalyst. When a mixture of potassium triflate (2 equiv) and L4 (1 equiv) was put in a mixed solvent of hexane/ethyl acetate, small colorless crystals appeared.20 X-ray crystallographic analysis of a crystal indicated that the potassium−L4 complex consisted of a 1:1 ratio of each component (Figure 1).

Scheme 2. Transformations of the Products

Figure 1. X-ray structure of the binaphtho-34-crown-10 (L4)−KOTf complex.

Although this result implied that the stable complex ratio was 1:1, it was not consistent with the fact that the desired reaction proceeded without any loss of enantioselectivity using KHMDS and L4 in a 2:1 ratio (Table 2). We further conducted NMR and MS analyses of the catalyst.21 In 1H NMR analysis at −60 °C, a ca. 2.5:1 ratio of a potassium−L4 complex and free L4 were observed when KHMDS and L4 were combined in a 1:1 ratio.21 The signals of the free L4 disappeared and only the potassium−L4 complex was observed KHMDS and L4 were combined in a 2:1 ratio.21 These results strongly suggest that the catalyst formation from KHMDS and L4 (1:1) occurs under equilibrium conditions and that the equilibrium moves to the 1:1 complex formation in the presence of an excess amount of KHMDS. Moreover, the formation of the 1:1 complex was also supported by MALDI-TOF MS analysis.21 We also conducted a preliminary study of the reaction of a simple ester. It was found that tert-butyl propionate (2d) reacted with α,β-unsaturated amide 1e in the presence of KHMDS−L4 to afford the desired product in high yield with high enantioselectivity (Scheme 3). It is noteworthy that asymmetric catalysis with a simple ester has been demonstrated, although there is still room for improvement of the diastereoselectivity. Scheme 3. Catalytic Asymmetric 1,4-Addition Reaction of a Simple Ester

The diphenylamide moiety of 3eb was selectively converted into an alcohol to give 4e (eq 1).15 The dimethylamide moiety of 3eb was converted into either an ethyl ester to give 5eb (eq 2)16 or an aldehyde to form 6eb (eq 3).17 Furthermore, the obtained 1,4-addition product was successfully transformed into useful intermediates of natural products (eqs 4 and 5). The 1,4adduct 3ob was treated with lithium dimethylaminoborohydride (LAB) to afford alcohol 4o, and after benzylation of the alcohol moiety, the second amide part was reduced with Schwartz reagent to afford the desired aldehyde 8, which is an intermediate in the total synthesis of (−)-faranal (eq 4).18

In summary, we have developed catalytic asymmetric 1,4addition reactions of simple amides that do not bear any activating groups. To our knowledge, this is the first example of a catalytic, highly enantioselective direct reaction using simple amides as nucleophiles. Binaphtho-34-crown-10 was found to be effective for chiral modification of the potassium cation, and the desired reaction proceeded in excellent yields with C

DOI: 10.1021/jacs.5b01943 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Communication

Journal of the American Chemical Society

Barbas, C. F., III. J. Am. Chem. Soc. 2000, 122, 2395. (e) Hajos, Z. G.; Parrish, D. R. J. Org. Chem. 1974, 39, 1615. (7) For examples of catalytic C−C bond-forming reactions using amides or esters without any activating group at the α-position, see: (a) Kobayashi, S.; Kiyohara, H.; Yamaguchi, M. J. Am. Chem. Soc. 2011, 133, 708. (b) Yamashita, Y.; Suzuki, H.; Kobayashi, S. Org. Biomol. Chem. 2012, 10, 5750. (8) Based on the Bordwell pKa table (see: http://www.chem.wisc. edu/areas/reich/pkatable/index.htm). (9) (a) Oare, D. A.; Henderson, M. A.; Sanner, M. A.; Heathcock, C. H. J. Org. Chem. 1990, 55, 132. (b) Fujieda, H.; Kanai, M.; Kambara, T.; Iida, A.; Tomioka, K. J. Am. Chem. Soc. 1997, 119, 2060. (c) Yamamoto, Y.; Suzuki, H.; Yasuda, Y.; Iida, A.; Tomioka, K. Tetrahedron Lett. 2008, 49, 4582. (10) (a) Mukaiyama, T.; Banno, K.; Narasaka, K. J. Am. Chem. Soc. 1974, 96, 7503. (b) Kobayashi, S.; Uchiro, H.; Fujishima, Y.; Shiina, I.; Mukaiyama, T. J. Am. Chem. Soc. 1991, 113, 4247. (c) Matsuo, J.; Murakami, M. Angew. Chem., Int. Ed. 2013, 52, 9109. (11) For representative examples of the development of ester equivalents as enolate precursors, see: (a) Kisanga, P.; McLeod, D.; D’Sa, B.; Verkade, J. J. Org. Chem. 1999, 64, 3090. (b) Bunlaksananusorn, T.; Rodriguez, A. L.; Knochel, P. Chem. Commun. 2001, 745. (c) Evans, D. A.; Downey, C. W.; Hubbs, J. L. J. Am. Chem. Soc. 2003, 125, 8706. (d) Suto, Y.; Kumagai, N.; Matsunaga, S.; Kanai, M.; Shibasaki, M. Org. Lett. 2003, 5, 3147. (e) Kumagai, N.; Matsunaga, S.; Shibasaki, M. J. Am. Chem. Soc. 2004, 126, 13632. (f) Saito, S.; Kobayashi, S. J. Am. Chem. Soc. 2006, 128, 8704. (g) Morimoto, H.; Lu, G.; Aoyama, N.; Matsunaga, S.; Shibasaki, M. J. Am. Chem. Soc. 2007, 129, 9588. (h) Matsubara, R.; Berthiol, F.; Kobayashi, S. J. Am. Chem. Soc. 2008, 130, 1804. (i) Iwata, M.; Yazaki, R.; Chen, I.-H.; Sureshkumar, D.; Kumagai, N.; Shibasaki, M. J. Am. Chem. Soc. 2011, 133, 5554. (12) For a successful example of a catalytic asymmetric direct-type 1,4-addition reaction of an enolizable prenucleophile with a monocarbonyl group that is in the carboxylic oxidation state, see: Suzuki, Y.; Yazaki, R.; Kumagai, N.; Shibasaki, M. Chem.Eur. J. 2011, 17, 11998. (13) (a) Cram, D. J.; Sogah, G. D. Y. J. J. Chem. Soc., Chem. Commun. 1981, 625. (b) Aoki, S.; Sasaki, S.; Koga, K. Heterocycles 1992, 33, 493. (c) Bakó, P.; Czinege, E.; Bakó, T.; Czugler, M.; Tõke, L. Tetrahedron: Asymmetry 1999, 10, 4539. (d) Bakó, T.; Bakó, P.; Szöllõsy, Á .; Czugler, M.; Keglevich, G.; Tõke, L. Tetrahedron: Asymmetry 2002, 13, 203. (e) Akiyama, T.; Hara, M.; Fuchibe, K.; Sakamoto, S.; Yamaguchi, K. Chem. Commun. 2003, 1734. (f) Bakó, P.; Makó, A.; Keglevich, G.; Kubinyi, M.; Pál, K. Tetrahedron: Asymmetry 2005, 16, 1861. For examples of asymmetric catalysis using a transition metal and chiral (aza)crown ethers, see: (g) Nagayama, S.; Kobayashi, S. J. Am. Chem. Soc. 2000, 122, 11531. (h) Kobayashi, S.; Hamada, T.; Nagayama, S.; Manabe, K. Org. Lett. 2001, 3, 165. (i) Kobayashi, S.; Hamada, T.; Nagayama, S.; Manabe, K. J. Braz. Chem. Soc. 2001, 12, 627. (j) Hamada, T.; Manabe, K.; Ishikawa, S.; Nagayama, S.; Shiro, M.; Kobayashi, S. J. Am. Chem. Soc. 2003, 125, 2989. (14) Relative and absolute configurations of the products 3 were determined by analogy to the structure of 3kb, which was determined by single-crystal X-ray structure analysis. The data have been deposited with the Cambridge Crystallographic Data Centre as CCDC 1032790. Copies of the data can be obtained free of charge by application to the Director, CCDC, 12 Union Road, Cambridge CB2 1EZ, U.K. (fax +448(0)12238336033 or [email protected]). (15) Fisher, G. B.; Fuller, J. C.; Harrison, J.; Alvarez, S. G.; Burkhardt, E. R.; Goralski, C. T.; Singaram, B. J. Org. Chem. 1994, 59, 6378. (16) Charette, A. B.; Chua, P. Synlett 1998, 163. (17) Zhao, Y.; Snieckus, V. Org. Lett. 2014, 16, 390. (18) Zijl, A. W.; Szymanski, W.; López, F.; Minnaard, J. A.; Feringa, B. L. J. Org. Chem. 2008, 73, 6994. (19) Wilding, E. E.; Gregg, J. J.; Mullins, R. J. Synlett 2010, 793. (20) Deposited with the Cambridge Crystallographic Data Centre (see ref 14 for the address) as CCDC 1032789. (21) See the Supporting Information.

outstanding diastereo- and enantioselectivities. The use of the chiral macro crown ether in asymmetric catalysis is also unique. The synthetic utility of this novel reaction was demonstrated by conversion of several of the products into useful derivatives, including the formal syntheses of natural products. Moreover, the structure of the chiral potassium catalyst was studied by Xray crystallographic, dynamic 1H NMR, and MALDI-TOF MS analyses. Further investigations aimed at clarifying the catalyst structure more in detail and extending the application of the reaction system to other catalytic reactions are underway in our laboratory.



ASSOCIATED CONTENT

S Supporting Information *

Procedures, spectra, and CIFs. This material is available free of charge via the Internet at http://pubs.acs.org.



AUTHOR INFORMATION

Corresponding Author

*[email protected] Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS This work was partially supported by a Grant-in-Aid for Scientific Research from the Japan Society for the Promotion of Science, the Global COE Program, The University of Tokyo, MEXT, Japan, and the Japan Science and Technology Agency. H.S. and I.S. thank the MERIT Program of The University of Tokyo for financial support.



REFERENCES

(1) Comprehensive Organic Synthesis; Trost, B. M. Ed.; Pergamon Press: Oxford, U.K., 1991. (2) (a) Otera, J. Chem. Rev. 1993, 93, 1449. (b) Larson, G. L.; Fry, J. L. Org. React. 2008, 71, 1. (c) Ganem, B. Acc. Chem. Res. 2009, 42, 463. (3) For reviews of catalytic asymmetric direct-type aldol reactions, see: (a) Shibasaki, M.; Yoshikawa, N. Chem. Rev. 2002, 102, 2187. (b) Alcaide, B.; Almendros, P. Eur. J. Org. Chem. 2002, 1595. (c) Notz, W.; Tanaka, F.; Barbas, C. F., III. Acc. Chem. Res. 2004, 37, 580. (d) Mukherjee, S.; Yang, J. W.; Hoffmann, S.; List, B. Chem. Rev. 2007, 107, 5471. (4) For reviews including examples of direct-type Mannich reactions, see: (a) Marques, M. M. B. Angew. Chem., Int. Ed. 2006, 45, 348. (b) Ting, A.; Schaus, S. E. Eur. J. Org. Chem. 2007, 5797. (c) Verkade, J. M. M.; van Hemert, L. J. C.; Quaedflieg, P. J. L. M.; Rutjes, F. P. J. T. Chem. Soc. Rev. 2008, 37, 29. (d) Gómez Arrayás, R.; Carretero, J. C. Chem. Soc. Rev. 2009, 38, 1940. (e) Kobayashi, S.; Mori, Y.; Fossey, J. S.; Salter, M. M. Chem. Rev. 2011, 111, 2626. (5) For reviews including examples of catalytic asymmetric directtype 1,4-addition reactions, see: (a) Sibi, M. P. Tetrahedron 2000, 56, 8033. (b) Krause, N.; Hoffmann-Röder, A. Synthesis 2001, 171. (c) Alexakis, A.; Benhaim, C. Eur. J. Org. Chem. 2002, 3221. (d) Cristoffers, J.; Baro, A. Angew. Chem., Int. Ed. 2003, 42, 1688. (e) Cristoffers, J.; Koripelly, G.; Rosiak, A.; Rössle, M. Synthesis 2007, 1279. (f) Almasi, D.; Alonso, D. A.; Nájera, C. Tetrahedron: Asymmetry 2007, 18, 299. (g) Sulzer-Mossé, S.; Alexakis, A. Chem. Commun. 2007, 3123. (h) Tsogoeva, S. B. Eur. J. Org. Chem. 2007, 1701. (i) Vicario, J. L.; Badia, D.; Carrillo, L. Synthesis 2007, 2065. (6) For leading examples in this research area, see: (a) Yamada, Y. M. A.; Yoshikawa, N.; Sasai, H.; Shibasaki, M. Angew. Chem., Int. Ed. Engl. 1997, 36, 1871. (b) Yoshikawa, N.; Yamada, Y. M. A.; Das, J.; Sasai, H.; Shibasaki, M. J. Am. Chem. Soc. 1999, 121, 4168. (c) Trost, B. M.; Ito, H. J. Am. Chem. Soc. 2000, 122, 12003. (d) List, B.; Lerner, R. A.; D

DOI: 10.1021/jacs.5b01943 J. Am. Chem. Soc. XXXX, XXX, XXX−XXX

Catalytic asymmetric direct-type 1,4-addition reactions of simple amides.

The development of catalytic asymmetric direct-type reactions of less acidic carbonyl compounds such as amides and esters has been a challenging theme...
337KB Sizes 0 Downloads 13 Views